Vernier Caliper Masters
Glastonbury’s Vernier Masters are used to calibrate and adjust calipers. The master is superior to gage block calibration because it does not require gage block stacks and therefore it is much faster to the inspect linear range of the tool. In addition they indicate wear on the caliper anvils because both the ID and OD jaws are inspected without additional setup.
- 1.00-6.00 in 1.00 increments for outside jaws, 1/2 to 4 1/2 inside jaws. ±.0002
- 25-150mm in 25.0mm increments for outside jaws, 12.5 to 112mm for inside jaws ±.005mm
- Case hardened, stabilized, ground and lapped to ±.0002
Part Number Price Add To Cart VC-1E $475.00
QUIKCHEK Surveillance Triangle
GSG QUIKCHEK is used to validate Coordinate Measuring Machines. The QUIKCHEK provides an easy periodic check on the CMM volume to ensure it is within calibration and providing you with accurate readings. It’s triangle shape and location of cylindrical bores provide a more volumetric evaluation of a CMM than the traditional ball bar.
The QUIKCHEK is your mechanical assurance of CMM accuracy. The QUIKCHEK is 440c stainless steel hardened to Rc 60-62, stress relieved and triple stabilized. Supplied with certification and case.
Specifications 8 Inch Models 16 Inch Models Hole Diameter 1.0000” 2.0000” Centerline to Centerline of Holes 2 Sides 8.0000” 16.0000” Centerline to Centerline of Hypotenuse 11.3137” 22.6274” Calibrated Accuracies Diameter Roundness Within .000010” .000020” Length Measurement Uncertainty .000020” .000040” 90º Angle <1 second <1 second Flat Parallel Within .000050” .0002” Part Number Price Add To Cart 8 Inch Model $3,995.00 16 Inch Model $8,950.00
0.10 - 1.00” diameters, Stainless Steel to reduce wear and prevent rust. Hardened, stabilized, ground and lapped to ±.0001. Comes complete with storage case. Part Number Price Add To Cart 01-1E $392.00
1/2”-6.00” diameter in 1/2 increments 12.5-150mm diameter in 12.5mm increments Case hardened, stabilized, ground, Chrome Plated and lapped to ±.0001. Part Number Price Add To Cart 16-1/2E $1,005.00
1.00-12.00 diameter in 1.00 increments 25-300mm diameter in 25.0mm increments Case hardened, stabilized, ground, Chrome Plated and lapped to ±.0001. Part Number Price Add To Cart 112E $1,919.00 Did you know gagesgalore.com can provide custom and non standard thread gages? Whether your needs are heavy industrial like Oil Field pipe threads (American Petroleum Institute), Helical Coil (STI) or even custom medical specifications, our partners at Glastonbury Southern Gage have the experience to solve your thread measuring application. For more information call 440-892-9277 or email firstname.lastname@example.org
© 2004 gagesgalore.com All Rights Reserved.
Ecommerce system powered by the DXCART Solution. DXCART © Copyright 1996-2004 DXStorm Inc.
All Rights Reserved. DXCART is a trademark of DXStorm Inc.