Counters LT30, 20A, LT11A, LT10A


HOME
View Cart
Overstock Items
Search Items
Browse Brands:
Calibration Services
Company Info
Terms and Conditions
FAQs
Home
LT30 - Counter compatible with our compact, high-precision DK series of digital gauges
Part Number
Price
Add To Cart
LT30-1G
$445.50
LT30-1GB
$751.50
LT30-1GC
$661.50
LT30-2G
$679.50
LT30-2GB
$1,156.50
LT30-2GC
$976.50
LT20A - Compact, lightweight, and easy-to-mount counter
LT20A-101
$445.50
LT20A-101B
$738.00
LT20A-101C
$648.00
LT20A-201
$666.00
LT20A-201B
$1,129.50
LT20A-201C
$958.50
LT11A - Compact, lightweight, and easy-to-mount counter
LT11A-101
$436.50
LT11A-101B
$706.50
LT11A-101C
$621.00
LT11A-201
$675.00
LT11A-201B
$1,125.00
LT11A-201C
$949.50
 
LT30 Specifications
Model
LT30-1G
LT30-1GB
LT30-1GC
LT30-2G
LT30-2GB
LT30-2GC
Display
6 digit backlit LCD, mode display
I/O
Measuring unit input
1 CH
2 CH
I/O connectors*1
BCD*2
-
-
-
-
RS-232C*3
-
-
-
-
RS-TRG*4
-
-
-
-
Reset function
Reset key or external input (I/O connectors)
-
-
RS-232C command
-
-
RS-232C command
Preset function
Preset value set with preset key, recalled with reset key.
-
-
Set or recalled with RS-232C command
-
-
Set or recalled with RS-232C command
Conparetor function
Three-level comparator Comparator value set with keys on the front panel. Result evaluation: LED and I/O connector output (photocoupler)
-
Up to 4 values can be set for comparator (key input). Switched with BCD terminal.
Set with RS-232C command
-
Up to 4 values can be set for comparator (key input). Switched with BCD terminal.
Set with RS-232C command
Hold function
Maximum, minimum, and peak-to-peak values. Measuring started by the start input of the I/O connector; update stop by pause input.
-
-
RS-232C can set or start.
-
-
RS-232C can set or start.
Input resolution
0.0001 mm, 0.0005 mm, 0.001 mm, 0.005 mm, 0.01 mm selectable
Display resolution
0.0001 mm, 0.0005 mm, 0.001 mm, 0.005 mm, 0.01 mm selectable
Direction
Can be switched
Reference point function
Function use enabled/disabled can be selected (if use is enabled, the unit enters reference point signal input wait status at the same time as power-on).
Maximum response speed
20 MHz (A/B phase difference)
Addition and subtraction function
-
A+B, A-B, B-A can be set with the direction setting.
Alarm
Speed over or measuring unit cable disconnected (Displayed on LCD or the I/O connector’s comparator outputs are all “H” (OFF).)
-
BCD alarm terminal "H" (OFF)
-
-
BCD alarm terminal "H" (OFF)
-
Data storage
Resolution, direction, comparator value, preset value, modes, etc.
-
BCD sign, etc
-
-
BCD sign, etc
-
key lock function
key lock and release.
Temperature
Operating:0~40°C, Storage:-10~50°C
Power consumption*5
5 W
5.5 W
5 W
8.5 W
9 W
8.5 W
Mass
Approx. 200 g
Approx. 230 g
Approx. 220 g
Approx. 210 g
Approx. 270 g
Approx. 230 g
Power supply
Power input connector (3 pins) : DC9.0-26.4 V
Compatible measuring unit
DKseries
CAD Dimensions for LT30-1, LT30-1B, LT30-1C, LT30-2, LT30-2B, LT30-2C
*1 I/O connector Input : Reset, peak-hold start, peak-hold pause, RS trigger (RS-232C models only) Output : Result evaluation (photocoupler)
*2 BCD (36 pin half-pitch connector) Input : Reset, peak-hold start, comparator value selection (4 settings) Output : five digits (open collector)One of current value/maximum value/minimum value/peak-to-peakvalue selected and output. Alerm output
*3 RS-232C (8 pin mini-DIN connector) Reset, preset value setting/recall, peak-hold start, peak-hold pause
*4 RS-TRG pin Trigger input for RS-232C data output
*5 With measuring unit connected.
 
LT20A Specifications
Model
LT20A-101
LT20A-101B
LT20A-101C
LT20A-201
LT20A-201B
LT20A-201C
Display
6 digit backlit LCD, mode display
I/O
Measuring unit input
1 CH
2 CH
I/O connectors*1
BCD*2
-
-
-
-
RS-232C*3
-
-
-
-
RS-TRG*4
-
-
-
-
Reset function
Reset key or external input (I/O connectors)
-
BCD terminal
RS-232C command
-
BCD terminal
RS-232C command
Preset function
Preset value set with preset key, recalled with reset key.
-
Recalled with BCD reset terminal
Set or recalled with RS-232C command
-
Recalled with BCD reset terminal
Set or recalled with RS-232C command
Conparetor function
Three-level comparator Comparator value set with keys on the front panel. Result evaluation: LED and I/O connector output (photocoupler)
-
Up to 4 values can be set for comparator (key input). Switched with BCD terminal.
Set with RS-232C command
-
Up to 4 values can be set for comparator (key input). Switched with BCD terminal.
Set with RS-232C command
Hold function
Maximum, minimum, and peak-to-peak values. Measuring started by the start input of the I/O connector; update stop by pause input.
-
-
RS-232C can set or start.
-
-
RS-232C can set or start.
Input resolution
0.0005 mm, 0.001 mm, 0.005 mm, 0.01 mm selectable
Display resolution
0.0005 mm, 0.001 mm, 0.005 mm, 0.01 mm selectable
Direction
Can be switched
Reference point function
Function use enabled/disabled can be selected (if use is enabled, the unit enters reference point signal input wait status at the same time as power-on).
Maximum response speed
20 MHz (A/B phase difference)
Addition and subtraction function
-
A+B, A-B, B-A can be set with the direction setting.
Alarm
Speed over or measuring unit cable disconnected (Displayed on LCD or the I/O connector’s comparator outputs are all “H” (OFF).)
-
BCD alarm terminal "H" (OFF)
-
-
BCD alarm terminal "H" (OFF)
-
Data storage
Resolution, direction, comparator value, preset value, modes, etc.
-
BCD sign, etc
-
-
BCD sign, etc
-
key lock function
key lock and release.
Temperature
Operating:0~40°C, Storage:-10~50°C
Power consumption*5
4 W
5W
4 W
6W
8W
6W
Mass
Approx. 200 g
Approx. 230 g
Approx. 220 g
Approx. 210 g
Approx. 270 g
Approx. 230 g
Power supply
Power input connector (3 pins) : DC9.0-26.4 V
Compatible measuring unit
DG, DLseries
CAD Dimensions for LT20A-1, LT20A-1B, LT20A-1C, LT20A-2, LT20A-2B, LT20A-2C
*1 I/O connector Input : Reset, peak-hold start, peak-hold pause, RS trigger (RS-232C models only) Output : Result evaluation (photocoupler)
*2 BCD (36 pin half-pitch connector) Input : Reset, peak-hold start, comparator value selection (4 settings) Output : five digits (open collector)One of current value/maximum value/minimum value/peak-to-peakvalue selected and output. Alerm output
*3 RS-232C (8 pin mini-DIN connector) Reset, preset value setting/recall, peak-hold start, peak-hold pause
*4 RS-TRG pin Trigger input for RS-232C data output
*5 With measuring unit connected.
 
LT11A Specifications
Model
LT11A-101
LT11A-101B
LT11A-101C
LT11A-201
LT11A-201B
LT11A-201C
Display
6 digit backlit LCD, mode display
I/O
Measuring unit input
1 CH
2 CH
I/O connectors*1
BCD*2
-
-
-
-
RS-232C*3
-
-
-
-
RS-TRG*4
-
-
-
-
Reset function
Reset key or external input (I/O connectors)
-
BCD terminal
RS-232C command
-
BCD terminal
RS-232C command
Preset function
Preset value set with preset key, recalled with reset key.
-
Recalled with BCD reset terminal
Set or recalled with RS-232C command
-
Recalled with BCD reset terminal
Set or recalled with RS-232C command
Conparetor function
Three-level comparator Comparator value set with keys on the front panel. Result evaluation: LED and I/O connector output (photocoupler)
-
Up to 4 values can be set for comparator (key input). Switched with BCD terminal.
Set with RS-232C command
-
Up to 4 values can be set for comparator (key input). Switched with BCD terminal.
Set with RS-232C command
Hold function
Maximum, minimum, and peak-to-peak values. Measuring started by the start input of the I/O connector; update stop by pause input.
-
-
RS-232C can set or start.
-
-
RS-232C can set or start.
Resolution
0.001 mm, 0.005 mm, 0.01 mm selectable
Direction
Can be switched
Reference point function
Function use enabled/disabled can be selected (if use is enabled, the unit enters reference point signal input wait status at the same time as power-on).
Maximum response speed
100 m/min
100 m/min
Addition and subtraction function
-
A+B, A-B, B-A can be set with the direction setting.
Alarm
Speed over or measuring unit cable disconnected (Displayed on LCD or the I/O connector’s comparator outputs are all “H” (OFF).)
-
BCD alarm terminal "H" (OFF)
-
-
BCD alarm terminal "H" (OFF)
-
Data storage
Resolution, direction, comparator value, preset value, modes, etc.
-
BCD sign, etc
Data signalling rate, etc.
-
BCD sign, etc
Data signalling rate, etc.
key lock function
key lock and release.
Temperature
Operating:0~40°C, Storage:-10~50°C
Power consumption*5
1.8W
2.9W
2.0W
2.3W
4.0W
2.5W
Mass
Approx. 200 g
Approx. 230 g
Approx. 220 g
Approx. 210 g
Approx. 270 g
Approx. 230 g
Power supply
Power input connector (3 pins) : DC9.0-26.4 V
Compatible measuring unit
DT512P/N
CAD Dimensions for LT11A-1, LT11A-1B, LT11A-1C, LT11A-2, LT11A-2B, LT11A-2C
*1 I/O connector Input : Reset, peak-hold start, peak-hold pause, RS trigger (RS-232C models only) Output : Result evaluation (photocoupler)
*2 BCD (36 pin half-pitch connector) Input : Reset, peak-hold start, comparator value selection (4 settings) Output : five digits (open collector)One of current value/maximum value/minimum value/peak-to-peakvalue selected and output. Alerm output
*3 RS-232C (8 pin mini-DIN connector) Reset, preset value setting/recall, peak-hold start, peak-hold pause
*4 RS-TRG pin Trigger input for RS-232C data output
*5 With measuring unit connected.



© 2004 gagesgalore.com All Rights Reserved.

Ecommerce system powered by the DXCART Solution. DXCART © Copyright 1996-2014 DXStorm Inc.
All Rights Reserved. DXCART is a trademark of DXStorm Inc.