Ratchet stop for consistent and repetitive measurements
0.157" DIA. interchangeable rods, with lapped measuring end, are calibrated and tested at the factory.
The rod length can be adjusted, to conpensate weear on the measuring tip, with two supplied wrenches
Satin-chrome finished throughout
Crisp clear graduations on the thimble
Complete with fitted carrying case
Flatness of reference face (bottom face of base): 0.00005" for 2.5" base/1.3µm for 63.5mm base
___________________________________ __0.00008" for 4.0" base/2µm for 101.6mm base
Flatness of reference face (bottom face of base): 0.0001"/2.3µm
Zero point error of rod: +/-(0.00008"+0.00004"xL*/3)
*truncated after decimal point
© 2004 gagesgalore.com All Rights Reserved.
Ecommerce system powered by the DXCART Solution. DXCART © Copyright 1996-2014 DXStorm Inc.
All Rights Reserved. DXCART is a trademark of DXStorm Inc.