gagesgalore.com  Online Gage Sales     Phone: 800-730-9277
Fax: 440-808-2202
Products Manufacturers Weekly Specials Search View Cart
Company Info Info. Request Catalog Request FAQs Email Home

Square Steel® - Metric System
Gage Block Sets in Case

With NVLAP Accredited Commercial Grade Calibration and Etched Serial Numbers
Two Millimeter Base
U.S. Fed. Accuracy Grade 2*
Part Number Blocks Per Set Page Price  
S2S45.MA1 45 Blocks 559 $1,325.70
Measuring Range:
6.0 Through 450 in .001 mm Steps
4.0 Through 450 in .01 mm Steps
2.0 Through 450 in .1 mm Steps

Blocks Included in Sets:
9 Blocks 2.001 mm Through 2.009 mm (Steps of .001 mm)
9 Blocks 2.01 mm Through 2.09 mm (Steps of .01 mm)
9 Blocks 2.1 mm Through 2.9 mm (Steps of .1 mm)
9 Blocks 1.0 mm Through 9 mm (Steps of 1.0 mm)
9 Blocks 10 mm Through 90 mm (Steps of 10 mm)
S2S45.MA1X 45 Blocks 559 $1,620.90
Measuring Range:
6.0 Through 450 in .001 mm Steps
4.0 Through 450 in .01 mm Steps
2.0 Through 450 in .1 mm Steps
Blocks Included in Sets:
Same as Above Plus the Following Accessories:
1 pair SA102 6 mm Radius Jaws
1 each SA4 Scriber Point
2 each SA7 Knurled Screws
2 each SA8 Studs
2 each SA9 Flat Head Screws (long)
2 each SA10 Flat Head Screws (short)
2 each SA11 Slotted Nuts
1 each SA12 19 mm Tie Rod
1 each SA13 38 mm Tie Rod
1 each SA14 57 mm Tie Rod
1 each SA15 76 mm Tie Rod
1 each SA16 114 mm Tie Rod
S2S88.MA1 88 Blocks 559 $2,438.64
Measuring Range:
6.0 Through 450 in .0005 mm Steps
4.0 Through 450 in .001 mm Steps
2.0 Through 450 in .01 mm Steps
2.0 Through 450 in .1 mm Steps
Blocks Included in Sets:
1 Block .5 mm
1 Block 2.0005 mm
9 Blocks 2.001 mm Through 2.009 mm (Steps of .001 mm)
49 Blocks 2.01 mm Through 2.49 mm (Steps of .01 mm)
18 Blocks 1.0 mm Through 9.5 mm (Steps of .5 mm)
10 Blocks 10 mm Through 100 mm (Steps of 10 mm)
S2S112.MA1 112 Blocks 559 $3,057.66
Measuring Range:
6.0 Through 450 in .0005 mm Steps
4.0 Through 450 in .001 mm Steps
2.0 Through 450 in .01 mm Steps
2.0 Through 450 in .1 mm Steps
Blocks Included in Sets:
1 Block .5 mm
1 Block 2.0005 mm
9 Blocks 2.001 mm Through 2.009 mm (Steps of .001 mm)
49 Blocks 2.01 mm Through 2.49 mm (Steps of .01 mm)
48 Blocks 1.0 mm Through 24.5 mm (Steps of .5 mm)
4 Blocks 25 mm Through 100 mm (Steps of 25 mm)
SS8.MA1X 8 Blocks 559 $3,435.30
Measuring Range:
125 mm to 2100 mm
Blocks Included in Sets:
8 Blocks, 125 mm, 150 mm, 175 mm, 200 mm, 250 mm, 300 mm, 400 mm, 500 mm
Accessories Included:
6 Each SA8 Studs
2 Each SA9 Flat Head Screws (long)
2 Each SA10 Flat Head Screws (short)
1 Each SA16 114 mm Tie Rod
1 Each SA17 152 mm Tie Rod
1 Each SA18 298 mm Tie Rod
1 Each SA19 400 mm Tie Rod
2 Each SA20 502 mm Tie Rods
U.S. Federal Accuracy Grade 1*
SS8.MAAX 8 Blocks 559 $4,664.70
Measuring Range:
125 mm to 2100 mm
Blocks Included in Sets:
Same as above SS8.MA
Under Two Millimeters: Thin Block Set
U.S. Federal Accuracy Grade 2*
SS17.MA1 17 Blocks 559 $1,199.16
Measuring Range:
1.115 Through 3.0 mm in .005 mm Steps
.7 Through 3.0 mm in .01 mm Steps
.3 Through 3.0 mm in .1 mm Steps
Blocks Included in Sets:
1 Block .405 mm
9 Blocks .41 mm Through .49 mm (Steps of .01 mm)
7 Blocks .3 mm Through .9 mm (Steps of .1 mm)
NOTE: croblox® Wear Blocks, Certificate of Calibration and/or etched serial numbers optional at extra cost available as option, contact [email protected].

NOTE: Sets also available without calibration or etched serial numbers, or with NVLAP Accredited Master Grade Calibration and Etched Serial Numbers, contact [email protected].

*For complete accuracy specifications, see Standards of Accuracy

Ecommerce system powered by the DXCART Solution DXCART © Copyright 1996-2000 DXStorm Inc. All Rights Reserved DXCART is a trademark of DXSTORM Inc.