Products	Manufacturers	Weekly Specials	Search	View Cart
Company Info	Info. Request	Catalog Request	FAQs	Email	Home

This week's specials

February 12th - February 18th

Starrett 0-6" Slide Caliper
Starrett Magnetic Base Indicator Holder
Starrett 12" Digimatic Height Gage

Starrett Slide Calipers Electronic Digital Calipers - The Only American Made Electronic Digital Caliper . . . These Starrett digital calipers can be used conventionally or they can output the measurement information to all Starrett SPC Plus® Electronic Data Collection Systems, computers and printers, for collection and analysis. (See Electronic Data Collection Systems section.) Readability Feature • Clear, easy-to-read numbers, properly sized to fit the caliper Accuracy and Long-Life Features • Resolution is .0005" (0.01 mm) • 6" (150 mm) linear accuracy is ± .001" (±0.03 mm) • Exclusive Starrett designed microprocessor chip • Long-wearing carbide faces on outside contacts on 6" and 150 mm models only • Hardened stainless steel body for long life • Depth rod with available attachment to seat the tool for more accurate measurements on the 6" (150 mm) and 9" (225 mm) sizes. The 12" (300 mm) size has a detachable depth rod available • Fine adjustment for precision measurements • Lock to hold the slide in position • One-year minimum battery life with two 3-volt batteries, No. CR2032 Action Features for 721B Full Function Series with Five Control Buttons and the New, Easy-to-Use Shift Button • Inch/millimeter conversion • Zero at any position • Hold readout at any position • Manual ON/OFF plus a built-in automatic off after 15 minutes of nonuse • Exclusive shift button to easily use more functions • LIMITS - After using the shift button, pressing LIMITS enters high and low dimensional limits. Out of limits readings will now show a flashing display • Output jack allows data transmission to the following peripherals for analysis, data collection, and hard copy documentation - Starrett 702 Computer Workstation - Starrett 772 Series Advanced Data Collection Systems - Starrett 741 Series Data Multiplexers - Other devices that support RS232C

6" Full Function Model

Part Number	Description	Range	Page	List Price	Sale Price
721B-6	Caliper with Output in Fitted Plastic Case	0-6"/150mm	141	$205.00	$165.00

Flexible Post Indicator Holders with magnetic base No. 657T Series For use with all Starrett Test, AGD, Dial, and Miniature Dial Indicators. Also accommodates similar indicators of other manufacturers. The flexible post is an assembly of short tubular steel sections and precision ball joints, linked by an internal steel cable. It can be adjusted to any position and locked by turning a lever near the magnetic base. This makes it possible to use indicators in awkward places that are hard to reach with conventional holding devices. Assembled to the magnetic base, the post has a vertical reach of approximately 15" (380 mm) and a horizontal reach of approximately 10" (250 mm). The indicator snug on the end of the post can be rotated through 360° and locked in any position. The base has three precision ground magnetic contact surfaces. Grips horizontally, vertically, or upside down. V-step holds base to arbors, shafts, chucks. The No. 657W Attachment allows fine adjustments to be made, operated by turning the fine-adjusting thumb screw (with post locked in rigid position) to zero, then set the indicator. A. Gage Rod 3/8" x 3" (9.5 mm x 75 mm) has 5/16, 1/4, and 7/32" (8, 6.3, and 5.5 mm) steps. Holds Nos. 708, 709, 711, and 811 Dial Test Indicators by body clamp. B. Adjusting Take-Up Sleeve with locking nut for maintaining proper degree of post rigidity. C. Post Snug has 3/8" (9.5 mm) hole (which will also grip AGD dial indicators by the stem). D. Flexible Post No. 657U. E. Locking Lever tightens internal steel cable to make post rigid and lock it in position. F. Magnetic Base No. 657P has push-button on/off switch.

Top inset, No. 657B1 Test Indicator gripped directly to its stem via the post snug; middle, holding a No. 196B1 Test Indicator via a No. 657S Snug/Sleeve attached to the indicator's 1/4" (6.3 mm) diameter rod; bottom, No. 657W Fine-Adjustment Attachment.

Complete Assemblies

Part Number	Description	Page	List Price	Sale Price
657T	Magnetic Base with Flexible Post Assembly	424	$150.00	$120.00

Top

Starrett 12" Digimatic Height Gage These Electonic Height Gages provide a versatile and economic solution for most height measurement applications. All measuring information from these tools can be entered directly into Starrett Data Collection Systems for analysis, data collection, and hard copy documentation. • Resolution .0005" (0.01mm) • Graduations .05' (1mm) • Accuracy .001" (0.03mm) per foot (300 millimeters) • Battery Life over 1 year with average use • Sharp and clear bar graduations in .050" and 1 mm increments, recessed to eliminate wear • Large, easy-to-read LCD display reads to .0005" or 0.01mm • Instant inch-millimeter conversion • Hardened, round scriber for durability and precision measuring from zero

Part Number	Description	Range	Page	List Price	Sale Price
752A-12	12" Digimatic Height Gage	0-12"/ 300mm	159	$691.00	$549.95